18×
Screw the cam bolts into both sides
Wall cabinet with door/2 drawers, 38 × 38 × 101.5 cm
1 h 28 min · one person · 25 steps · 17 panels · 86 fittings
Screw the cam bolts into both sides
Screw a suspension fitting into each side
Tap dowels into the top and bottom and stand them on one side
Turn the cam locks
Slide in the back panel
Tap in the other dowels and fit the other side
Turn the other cam locks
Turn it onto its front, square it up and nail one corner
Nail the other bottom corner
Nail the top corner
Nail on the two plastic brackets at the top
Nail the back all along
Hang it on the suspension rail
Adjust the suspension fittings
Click on the covers
Click the back onto the drawer sides (do this 2 times)
Slide the bottom in and screw it to the back (do this 2 times)
Screw the front fittings on and click the front onto the drawer (do this 2 times)
Screw the runners into the cabinet
Put the 2 drawers on the runners
Push in the shelf pins
Lay the shelf on the pins
Press the hinges into the door
Screw the mounting plates to the side
Clip the door onto the plates