Print: SKANSNÄS chair | My Assemble Assistant

Drawing step 1 of 19

Assembly guide

SKANSNÄS

Chair

25 min · one person · 19 steps · 8 panels · 23 fittings

Tools

Phillips screwdriver
Box cutter (nice to have)

Panels

ABack frame1×
BFront frame1×
CSide rail2×
DStretcher2×
EBackrest1×
FSeat1×

Fittings

Felt pad 4×
Threaded stud 8 × 60 mm4×
Connector nut 20 mm4×
Screw 5 × 50 mm2×
Seat bracket 3×
Screw 4 × 12 mm3×
Screw 4 × 14 mm3×

Follow it in 3D, read out loud: myassembleassistant.app/build/skansnas-chairNot affiliated with IKEA. Check each step against the paper manual.

14×

Stick the felt pads on the back legs

24×

Screw the threaded studs into the legs

31×

Push a connector nut into a side rail

4

Tighten the side rail onto its stud

51×

Fit the other side rail the same way

6

Tighten it with the Allen key

SKANSNÄS, Chair2 / 5

7

Slot in the stretchers

82×

Push connector nuts into the free ends

9

Lay the back frame on top

10

Tighten both and stand the chair up

11

Hang the backrest on its pins

12

Push the backrest down until it clicks

SKANSNÄS, Chair3 / 5

13

Tighten all four connector nuts

142×

Drive the two long screws in at the back

153×3×

Screw the three brackets onto the seat

16

Lower the chair onto the seat

172×

Screw the side brackets to the rails

181×

Screw the front bracket to the front rail

SKANSNÄS, Chair4 / 5

19

Stand the chair up

SKANSNÄS, Chair5 / 5