SLÄKT

Screw two cam bolts into the shelf unit's bottom

Push the back panel onto it

Lock it with two cam locks

Fit the divider

Turn the divider's cam locks

Stand the shelf unit on the front bottom rail

Stand the middle divider on the rail and lock both

Fit the middle rail across the back of the bays

Fit the back bottom rail

Fit the back top rail

Slide in the shelf and screw it down

Tap seven dowels into the head end of the unit

Stand the headboard against the unit

Turn the two cam locks at the headboard

Fit the leg caps and glides

Screw the slat rails along the side rails

Screw the connecting pins into the top rail

Lock the back side rail onto the pins

Tap dowels into the front side rail

Fit the front side rail

Bolt the side rails to the headboard

Turn the last cam locks along the rails

Stand the footboard against the foot end

Turn the three cam locks at the footboard

Bolt the side rails to the footboard

Screw the drawer runners into the bays

Build the four drawers and slide them in

Screw the slat stops onto the corners

Roll out the slatted base

Tuck the end slats under the stops

Screw the headboard brackets on

Hang the padded headboard on the brackets

Pull the cover over the padded headboard