Screw four cam bolts into the bottom and the shelf
Changing table/desk, 90 × 79 × 100 cm
50 min · one person · 26 steps · 13 panels · 85 fittings
Screw four cam bolts into the bottom and the shelf
Fit the divider between them
Lock the divider with four cam locks
Screw eight cam bolts into the side panels
Push the sides on
Lock the sides with eight cam locks
Screw two cam bolts into the shelf's back edge
Turn it over and slide the lower back in
Lock the back with two cam locks
Screw the back to the bottom
Screw in the four feet
Stand it up and screw on the upper back
Screw six shelf holders into the right compartment
Lay the shelf on the holders
Level it
Mark the wall
Move it away and drill the holes
Push the wall plugs in
Screw it to the wall
Click the cover caps on
Tap two dowels into the tray's front lip
Screw the tray sides to the back
Screw the floor on from below
Screw the tray brackets on at the top
Slide the tray in onto the brackets
Lock the tray with two screws