SONGESAND

Tap dowels into the headboard panel

Fit the double cam bolts into the panel

Fit double cam bolts into the ends of the lower rail

Push the lower rail onto the panel

Lock the cam lock

Turn it round and fit the upper rail

Lock the cam lock

Fit the other double cam bolts into the rail ends

Tap dowels into the rail ends

Push the posts onto the rail ends

Lock the cam locks

Press the glides under the posts

Turn it over and lock the last cam locks

Tap the dowels into the side rails

Press the connectors into the side rails

Stand the headboard against the wall and screw in the connector bolts

Fit a side rail to the headboard

Fit the other side rail

Press the glides under the footboard

Screw the connector bolts into the footboard

Push the footboard onto the side rails

Tighten the connectors at the foot

Tap the plastic dowels into the top of the headboard

Screw the cam bolts into the top

Put the top on the headboard

Lock the cam locks

Press the cover caps on

Screw the slat rails to the side rails

Pull the centre bar out and lay it across

Screw the ends of the centre bar down

Lock its length

Fit the slat holders at the ends of the rails

Lay in the slatted base

Tap the dowels into the box sides

Screw the cam bolts into the fronts

Stand the sides on the fronts

Lock the cam locks

Screw the castors onto the bars

Tap the dowels into the bars and cross pieces

Fit the bars and cross pieces into the wide box

Lock the middle bar

Fit the bars and cross piece into the narrow box

Slide the bottoms down the grooves

Screw the cam bolts into the backs

Put the backs on

Lock the cam locks

Roll the boxes under the bed