14×
Tap dowels into the ends of the back panel
Dressing table, 100 × 48 cm
25 min · one person · 34 steps · 10 panels · 110 fittings
Tap dowels into the ends of the back panel
Screw the divider to the back panel
Screw two cam bolts into the divider
Tap a dowel into each end of the rails
Push the short rail onto the divider
Screw cam bolts into both sides
Fit the right side
Push the long rail onto the divider
Fit the left side
Turn the eight cam locks
Push the glides into the sides
Stand it up
Screw in the drawer runners
Screw cam bolts into the top
Tap dowels into the top edges
Lower the top onto the frame
Turn the six cam locks under the top
Lay the glass top on
Fit the glass clips at the back
Screw cam bolts into the shallow drawer front
Fit the sides and lock them
Slide in the bottom and fit the back
Lock the back
Screw on the knob
Screw cam bolts into the deep drawer front
Tap dowels into the sides
Fit the sides and lock them
Slide in the bottom and fit the back
Lock the back
Screw on the knob
Hang the divider in the deep drawer
Hang the deep drawer on its runners
Hang the shallow drawer on its runners
Line up the drawer fronts