12×4×
Screw a small bracket onto each side
Wash-stand with doors, 80 × 48 × 63 cm
51 min · one person · 26 steps · 12 panels · 67 fittings
Screw a small bracket onto each side
Screw the hanging brackets onto the sides
Screw the hinge plates onto the sides
Click the back rail into one side
Hook in the lower back board
Click in the bottom front rail
Press the other side on
Push in the connectors at the bottom
Push in the connectors at the top
Screw the plate onto the top front rail
Fit the top front rail
Check it's square
Mark where the rail goes
Screw the suspension rail to the wall
Hang the frame on the rail
Lock the hanging brackets to the rail
Screw the bottom brackets to the wall
Screw the door stop onto the bottom rail
Screw in four supports and lay in the bottom shelf
Screw in the supports for the other two shelves
Lay in the narrow shelf
Lay in the middle shelf
Lay the doors face down and stick on the bumpers
Press the hinges into the doors
Click the doors onto the hinge plates
Line up the doors