TARVA

Screw the runners onto both sides

Screw the cam bolts into the sides

Screw runners onto one face of the middle frame

Turn it over and do the other face

Screw the cam bolts into the back post

Tap dowels into the back boards for the left half

Lay the left side down and stand its back boards in it

Lock the back boards with cam locks

Stand it up and push the middle frame onto the boards

Lock it with cam locks

Tap dowels into the back boards for the right half

Stand the right half's back boards in the other side

Lock them with cam locks

Push the right half onto the middle frame

Lock it with cam locks

Screw the wall brackets under the top

Screw the cam bolts into the top

Tap dowels into the sides and posts and put the top on

Lock the top with cam locks

Screw the cam bolts into the bottom

Tap a dowel into the middle leg

Bolt the middle leg to the bottom

Turn it upside down and put the bottom on

Lock the bottom with cam locks

Bolt the bottom to the middle posts

Screw the corner brackets onto the short rails

Screw a long rail to the brackets

Turn it round and screw on the other long rail

Screw the frame under the chest

Fit the barrel nuts and threaded rods in the legs

Bolt the legs into the corners

Tap a floor pad onto every leg

Screw in the lowest runners

Mark the wall through the brackets

Drill the holes and push in the plugs

Screw it to the wall

Screw the cam bolts into a drawer front (do this 6 times)

Tap dowels into the sides and stand them on the front (do this 6 times)

Lock the sides with cam locks (do this 6 times)

Slide in the drawer bottom (do this 6 times)

Put the drawer back on (do this 6 times)

Tap the ribbed dowels through the back (do this 6 times)

Turn it upside down and fit the runners (do this 6 times)

Screw the knobs on (do this 6 times)

Slide in all 6 drawers