TARVA

Screw the runners onto both sides

Screw the cam bolts into the sides

Tap dowels into the back boards and dividers

Lay one side down and stand the dividers in it

Lock the upper divider with a cam lock

Stand the three back boards in it

Lock the back boards with cam locks

Lower the other side on top

Lock this side with cam locks

Screw the cam bolts into the bottom

Turn it upside down and put the bottom on

Lock the bottom with cam locks

Screw the corner brackets onto the short rails

Screw a long rail to the brackets

Turn it round and screw on the other long rail

Screw the frame under the chest

Fit the barrel nuts and threaded rods in the legs

Bolt the legs into the corners

Tap a floor pad onto each leg

Screw the wall brackets under the top

Screw the cam bolts into the top

Stand it up and put the top on

Lock the top with cam locks

Screw in the lowest runners

Mark the wall through the brackets

Drill the holes and push in the plugs

Screw it to the wall

Screw the cam bolts into a drawer front (do this 5 times)

Tap dowels into the sides and stand them on the front (do this 5 times)

Lock the sides with cam locks (do this 5 times)

Slide in the drawer bottom (do this 5 times)

Put the drawer back on (do this 5 times)

Tap the ribbed dowels through the back (do this 5 times)

Turn it upside down and fit the runners (do this 5 times)

Screw the knobs on (do this 5 times)

Slide in all 5 drawers