TARVA

Screw a runner onto each side

Screw the cam bolts into the sides

Lay one side down and stand the shelf in it

Lock the shelf with a cam lock

Stand the two bottom rails in it

Lock the rails with cam locks

Tap in the dowels and lower the other side on

Lock this side with cam locks

Screw the cam bolts into the top

Stand it up and put the top on

Lock the top with cam locks

Turn it upside down and screw on the front and back rails

Fit the short rails between them

Drop a corner bracket into each corner

Screw the brackets in

Fit the barrel nuts and threaded rods in the legs

Bolt the legs into the corners

Turn the two long screws into the bottom rails

Lay in the hardboard panel and nail two corners

Line it up and nail the opposite edge

Nail it all round

Stand it up

Screw the cam bolts into a drawer front

Tap dowels into the sides and stand them on the front

Lock the sides with cam locks

Slide in the drawer bottom

Put the drawer back on

Tap the ribbed dowels through the back

Turn it upside down and fit the runners

Screw the knob on

Slide in the drawer