VADHOLMA

Screw the feet into the end frames

Tap four dowels into the back rail

Turn an end frame on its side and fit the back rail

Push two barrel nuts into the rail

Bolt the rail to the leg

Tap twelve dowels into each shelf

Fit the two shelves into the end frame

Bolt the shelves on

Stand it on the end frame

Bolt on the other end frame

Stand it up and drill for the towel rail

Screw on the towel rail

Screw the drawer runners inside the end frames

Tap six dowels into the top of the frame

Screw six cam bolts into the worktop

Lay the worktop on

Lock the worktop

Level it with the feet

Mark the wall under the worktop

Screw the wall bracket to the wall

Push it back and screw the bracket to the worktop

Screw two cam bolts into the drawer front

Screw a small screw into the middle of the front

Tap a dowel into each drawer side

Push the sides onto the front (do this 2 times)

Lock the sides

Hook the support bar onto the screw

Slide in the drawer bottom

Lay the back on

Fix the back with four connectors

Screw the support bar to the back

Clip a runner lock under each front corner

Turn it over and drill for the handle

Screw on the handle

Pull out the runners and set the drawer on

Push it in until it clicks