VILHATTEN

Screw the drawer runners onto the right side and the divider

Tap five dowels into the divider

Screw two connector bolts into the fixed shelf

Push the divider onto the shelf

Lock the divider with two cam locks

Screw the bottom onto the divider

Tap the dowels into the shelf and the bottom

Screw on the left side

Screw the two angle brackets under the bottom

Tap the dowels into the plinth and the back rail

Push the plinth onto the left side

Fit the back rail and the right side

Screw the right side on

Screw the brackets to the plinth

Tap the dowels into the top

Fit the top and screw it on

Slide the back panel into the grooves

Push four rivets through the back into the bottom

Clip the two halves of the back together

Press the glides into the bottom edges

Stand it up and screw on the wall fittings

Screw a spacer onto each fitting if there's a skirting board

Push the wardrobe against the wall

Check it touches the wall at the bottom

Mark the wall through the fittings

Move the wardrobe away from the wall

Drill the holes and push in the plugs

Screw the fittings to the wall

Screw the rail holders in

Drop the clothes rail into the holders

Stick the bumpers on the shelf's front edge

Screw the hinges onto the doors

Hang the doors

Screw a knob on each door

Screw four connector bolts into each drawer front

Push the sides onto the bolts

Lock the sides with four cam locks

Slide the bottom into the grooves

Knock the drawer stop into each back

Fit the back between the sides

Lock the back with four cam locks

Screw the runners onto the drawer sides

Screw a knob onto each drawer

Slide the drawers in