VIMLE

Screw the rods into the seat frames

Lower the backrests onto the rods

Tighten a washer and nut onto each rod

Screw the rods into the top boards

Lower the top boards onto the backrests

Tighten a washer and nut onto each rod from below

Turn the corner section upside down and screw in the legs

Stick a felt pad under each leg

Stand it up and screw on the four hooks

Turn the armrest over and screw in the legs

Stick a felt pad under each leg

Screw the rods into the armrest

Push the armrest onto the end of the section

Tighten a washer and nut onto each rod

Stand the section on its end and fit a hanging pin

Stand the section on its end and fit a hanging pin

Fit the top bracket to the open end

Bolt the support to the end of the seat frame

Fit the two leg plates and screw in the legs

Stick a felt pad under each new leg

Turn the footstool upside down and screw in the legs

Stick a felt pad under each leg

Stand it up and lay the lid on

Stand the corner section where the sofa will go

Lift the section onto the corner's hooks

Lift the section onto the corner's hooks

Set the footstool at the open end

Lay the seat cushions on the seat

Fill the back cushions and stand them in place