VIMLE

Screw the studs into the seat frames

Lower the backrests onto the studs

Lock the backrests with the clamps

Open the lid and lift out what's inside

Screw four studs into the back end

Lay the chaise on its side and push the back end on

Screw a wing nut onto each stud

Screw in the six legs

Stick a felt pad under each leg

Stand it up and close the lid

Screw two studs into each base piece

Push a base piece onto the backrest and clamp it

Push on the other base piece and clamp it

Tip it onto its back and screw in the four legs

Stick a felt pad under each leg

Stand it up and screw on the four hooks

Turn the armrests over and screw in the legs

Stick a felt pad under each leg

Pull the covers down over the backrests

Fasten the cover and pull it over the seat front

Fit the cover around the storage box and the lid

Pull the cover over the back end

Fit the cover on the corner section

Pull the covers over the armrests

Screw the rods into the armrests

Push the armrest onto the end of the section

Tighten a washer and nut onto each rod

Stand the chaise on its back end and push the armrest on

Bolt the armrest on from inside the chaise

Tighten a washer and nut onto the rod

Screw the hooks onto the side of the chaise

Screw a hanging stud into the section ends

Stand the corner section where the sofa will go

Lift the section onto the corner's hooks

Lift the section onto the corner's hooks

Set the chaise under the free end and hook it on

Zip the covers onto the seat cushions and lay them in

Fill the back cushions and stand them in place